Simply by refinishing your designer radiators, you can totally transform your house, making it look new and clean. There are a variety of radiator painting techniques to choose from, depending on the effect you want to achieve and the types of radiators you have in your home. Since radiators come in a number of shapes and sizes and are made from a variety of materials, the techniques used to paint them can differ. This can be seen throughout the board, from cast iron radiators to flat panel radiators.
Make sure your Designer Radiators are free of dirt and fluff before painting them, or you’ll end up with an imperfect finish. To remove any dirt, use warm soupy water or a damp cloth, and make sure the surface is completely dry before you begin. Since normal paint (for wood, walls, etc.) will discolour and leave you with an unsatisfactory finish, you should always try to use paint made for metallic surfaces. Of course, you must ensure that it is heat resistant. When painting the radiators, it’s always a good idea to cover the floor and any surrounding furniture with newspapers or cloths to shield them from any splashes or spills. If your radiators have already been finished, it’s a good idea to give them a fast sanding to ensure the paint adheres.
When the designer radiator is still warm, it’s a good time to start applying your coat of paint. Make sure the radiators aren’t too hot; otherwise, you could end up burning yourself. If you closely follow these recommendations, you can find that the process goes smoothly and that the results are outstanding. Always make sure you’re using high-quality equipment and paint brushes to achieve the best results. To suit the grooves on the radiator, you can apply the paint vertically. Other radiators, such as cast iron radiators and flat panel radiators, are obviously exempt from this rule. To make the process smoother, paint the radiator in parts. To avoid drips and patches of paint running down the radiator’s surface, use tiny quantities of paint. If you’re having trouble reaching some parts of the radiator, such as the back, a long-handled brush or even a roller will help.